Brand new Gadget :P

hoho after 5 days waiting .. my brand new gadget arrive BUT !!!!!!!! tersalah beli mau beli D60 tapi tersilap beli D40 :((






spec ..

Effective pixels

6.1 million

Image sensor		RGB CCD, 23.7 x 15.6 mm, 6.24 million total pixels: total pixels
Image size		L (3,008 x 2,000) / M (2,256 x 1,496) / S (1,504 x 1,000)
Sensitivity		200 to 1600 (ISO equivalent) in steps of 1 EV with additional setting one step over 1600
Storage media		SD memory card, SDHC compliant
LCD monitor		2.5-in., 230,000-dot, low-temp. polysilicon TFT LCD with brightness adjustment
Exposure metering		3D Color Matrix Metering II, Center-weighted and Spot Metering
Exposure modes		Digital Vari-program (Auto, Auto [Flash Off], Portrait, Landscape, Child, Sports, Close Up, Night Portrait), Programmed Auto [P] with flexible program; Shutter-Priority Auto [S]; Aperture-Priority Auto [A]; Manual [M]
Interface		USB 2.0 (High-speed): Mass Storage and PTP selectable
Power source		Rechargeable Li-ion Battery EN-EL9, charging voltage (Quick Charger MH-23), 7.4V DC, AC Adapter EH-5 (available separately; requires optional AC Adapter Connector EP-5)
Dimensions (W x H x D)		Approx. 126 x 94 x 64mm (5.0 x 3.7x 2.5 in.)
Weight		Approx. 475g (1lb. 1oz.) without battery, memory card or body cap

Package Includes

EN-EL9 Rechargeable Li-ion Battery
MH-23 Quick Charger
UC-E4 USB Cable\
Software Suite CD-ROM
DK-16 Rubber Eyecup
AN-DC1 Camera Strap
BF-1A Body Cap
DK-5 Eyepiece Cap
BS-1 Accessory Shoe Cap
Bag
2GB SD Card

PC MODDING SERVICES ;))

Here is my basic price ....

1.Square side panel window- rm140
Custom side panel window- starting from rm200

2.Square top panel window- rm140

3.fan blowhole- rm50

4. Case painting- starting from rm200.
Price depends on type n size of case n also type of paint chosen.

5. Cable management(hiding wires)- rm80

6. Adding wheels to case. Including wheels(can choose black or white color)- rm80

7. Water cooling kit installation- starting from rm80




other services available on request ... pls do contact me on 017-312 0501 ( by sms ) or can contact me at myhezry@yahoo.com.my ( by Ym! )

TOWER CASE MODDING !

INWIN Q500 tower casing modding ....

original look on INWIN Q500

equipment that will be install inside the tower casing

Removing all the panel & device rack 1 by 1 for the painting session

Changing the molex connector & sleeving ... if u dont have the right tool to remove the pin of the connector it will be a pain in the ass !!!@@$$%^&*

for your own benefit just take a simple photo before removing the molex connector

the painting session ... i spray the casing with 3 layer of flat black and 1 layer of clear spray ... before the session begin i allready remove all the rivet at the casing to get the casing part by part so i wont miss anything while spraying ... after spraying i have to reassamble the casing and rivet it back together ;))

like i said after the painting session i have to reassamble back the casing and rivet the tray all back together like they allways does xD ...

The painting session is done ... now we have to cut the top panel to fit 120mm cooler master fan (2) it will be 240mm x 120mm for the 2 fans ... before that i show u the tools that i use for cutting ...

Cutting the top panel ...

Cutting the left panel


Result of top panel and left panel

Reinstall hardware after cable management
( no more messy wire .. but pls ignore the On/Off wire that lay at the bottom )
Cover the Top panel with carbon fiber sticker



Try to get the true look of the top panel on the casing ;p


it still have alot of touch up to finish this but i cant wait to test the light ...
the glow in the dark connector not response accordingly due to not enough UV LIGHT !!!
the uv light come in set of 2 ... but 1 of the light spoil badly enuff i didnt keep the receipt to change the light back !!! !!@!@##!@#$%^

lets try it in the dark :P ngeeee

i move the up light to the upper deck so u can get the idea of glow in the dark molex connector